{"id":228,"date":"2015-05-06T20:58:20","date_gmt":"2015-05-06T20:58:20","guid":{"rendered":"http:\/\/deadpineapple.net\/?p=228"},"modified":"2015-05-06T20:58:20","modified_gmt":"2015-05-06T20:58:20","slug":"assistance-needed","status":"publish","type":"post","link":"https:\/\/deadpineapple.net\/?p=228","title":{"rendered":"Assistance needed"},"content":{"rendered":"<p>With the GreenStuff pads fitted the braking has been what I&#8217;d expect from a non assisted setup and is similar to that of the Westfields I&#8217;d owned previously. A good firm push will really slow the car down and it is possible to lock the brakes. However jumping from a fully assisted Volvo or Porsche into the Midget does highlight the difference in pedal effort. Therefore it was time\u00a0 to fit a brake servo primarily to boost the initial braking action.\u00a0 Having sought\u00a0 advice from the K Midget Facebook group I ordered a Powertune 1.6:1 unit from MGBHive and waited for it to arrive.<\/p>\n<p>In the meantime I had a set of 256 &amp; 264 HKS cams arrive for the 4A-GE and today the camshaft oil seals arrived so out into the man cave I went. The camshafts were fitted in about an hour (the 256 went on the inlet and the 264 on the exhaust)\u00a0 and then the courier arrived with the servo which was hastily un-boxed&#8230;.<\/p>\n<p><a href=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-229\" src=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-1-300x225.jpg\" alt=\"servo-1\" width=\"300\" height=\"225\" srcset=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-1-300x225.jpg 300w, https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-1.jpg 640w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><\/p>\n<p>Fook it is big!! I was hoping it would fit in the gap between the brake master cylinder and the wheel arch but being 7.5&#8243; diameter there was no way it was going in. It was now looking like either an expensive paper weight or else it was a long job ahead<\/p>\n<p>A cuppa and an early lunch later and it was time to man up and pull the offside wing off the Midget. Fortunately one of the K Midget boys had posted a pic of the servo mounted under the wing so I knew it was doable.<\/p>\n<p><a href=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-fitted.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-230\" src=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-fitted-300x225.jpg\" alt=\"servo-fitted\" width=\"300\" height=\"225\" srcset=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-fitted-300x225.jpg 300w, https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-fitted.jpg 640w\" sizes=\"auto, (max-width: 300px) 100vw, 300px\" \/><\/a><\/p>\n<p>Here&#8217;s the servo fitted and plumbed in before refitting the wing and below is the finished job with next to nothing visible although the camera didn&#8217;t pick up the wing edge.<\/p>\n<p><a href=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-hidden.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-231\" src=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-hidden-225x300.jpg\" alt=\"servo-hidden\" width=\"225\" height=\"300\" srcset=\"https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-hidden-225x300.jpg 225w, https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-hidden-768x1024.jpg 768w, https:\/\/deadpineapple.net\/wp-content\/uploads\/2015\/05\/servo-hidden.jpg 1920w\" sizes=\"auto, (max-width: 225px) 100vw, 225px\" \/><\/a><\/p>\n<p>Due to the rain a brief test was carried out on the gravel drive and I can confirm that the brakes do work although they probably need another bleeding.<\/p>\n<p>&nbsp;<\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>With the GreenStuff pads fitted the braking has been what I&#8217;d expect from a non assisted setup and is similar to that of the Westfields I&#8217;d owned previously. A good firm push will really slow the car down and it is possible to lock the brakes. However jumping from a fully assisted Volvo or Porsche &hellip; <a href=\"https:\/\/deadpineapple.net\/?p=228\" class=\"more-link\">Continue reading <span class=\"screen-reader-text\">Assistance needed<\/span> <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[],"class_list":["post-228","post","type-post","status-publish","format-standard","hentry","category-mgmidget"],"_links":{"self":[{"href":"https:\/\/deadpineapple.net\/index.php?rest_route=\/wp\/v2\/posts\/228","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/deadpineapple.net\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/deadpineapple.net\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/deadpineapple.net\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/deadpineapple.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=228"}],"version-history":[{"count":1,"href":"https:\/\/deadpineapple.net\/index.php?rest_route=\/wp\/v2\/posts\/228\/revisions"}],"predecessor-version":[{"id":232,"href":"https:\/\/deadpineapple.net\/index.php?rest_route=\/wp\/v2\/posts\/228\/revisions\/232"}],"wp:attachment":[{"href":"https:\/\/deadpineapple.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=228"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/deadpineapple.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=228"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/deadpineapple.net\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=228"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}